GBT-7
GUITAR / BASS TUNER
User Manual
Layout
1.
Internal microphone
4.
Power/Mode switch
2.
Note indicators
5.
Guitar/Bass input
3.
Flat/In-tune/Sharp indicators
Note:
Most guitars have 6 strings but some models have an additional low B (7 string)
Most basses have 4 strings but some models have an additional low B (5 string) and even a high C (6 string)
The GBT-7 has extended note range to handle these instruments in addition to standard types
Setting up
The GBT-7 operates from 2 x AAA batteries.
Slide open the rear battery cover and insert batteries as shown below
Operation
For electric instruments, plug in a jack lead from the instrument to the Guitar/Bass input (5)
Ensure that the instrument volume and tone controls are turned fully up
For acoustic instruments, place the GBT-7 internal mic. (1) within listening distance of the instrument sound-hole
Push the Power/Mode switch up to either Bass or Guitar setting, depending on the instrument to be tuned
The green “In-tune” LED will flash until a note is played. Pluck a single string to activate the tuner
When a sound is detected from the guitar or bass, the nearest note will be displayed on the Note indicators (2)
Tune the string to tension until the correct note is displayed for that string
When the correct note is displayed, use the Flat/In-tune/Sharp indicators to guide the tuning
When the note is flat (
b
), tighten the tuner slightly, when the note is sharp (#), slacken it slightly
Continue tuning adjustment until the green “in-tune” (>o<) LED is lit continually
Switch off when not in use and remove batteries if not used for long periods of time
Specifications
Power supply
3Vdc (2 x AAA batteries)
Tuning modes
Guitar (6 or 7 string), Bass (4, 5 or 6 string)
Dimensions
96 x 50 x 17mm
Weight
34g (no battery)
Errors and omissions excepted.
Copyright© 2013. AVSL Group Ltd.
