953.230UK User Manual
Input connections
Mount the gooseneck microphone into the XLR microphone connector on top of the base unit (1).
If a background music or other line level audio source is required, this may be connected to the 3.5mm
Aux input at the rear of the base unit (6). This will play through both zones as stereo left + right to
zone 1 and 2.
Audio connections for the 3.5mm jack is shown opposite.
The Aux signal is governed by the Aux output level control
(7) and the Aux signal indicator will react to the audio
accordingly.
Lastly, connect the supplied power adaptor to the DC input jack on the rear panel (11).
Operation
Turn the Aux Level and Mic Level controls fully down before powering up the COM230.
Ensure the correct supply voltage and then connect the power adaptor to a mains outlet.
If an Aux input is connected, start playback, and gradually increase the Aux level control (7) to check
the output through the speakers.
To test the paging mic, press the Zone 1 and 2 select and Page buttons so that all 3 are lit (3, 4, 5).
Gradually increase the Mic level control (8) whilst speaking into the microphone until the required
output level is heard through the connected speakers.
Note: speech through the microphone will cause the Aux signal level to be muted automatically.
Once the Mic and Aux levels are set to the desired levels, press the Page button so that it is off (not lit)
To page either zone independently, ensure that only that Zone select button (3 or 4) is lit before
pressing the Page button. If both Zone select buttons are lit, paging will address all speakers.
Ensure Aux signal is turned down and Page button is off before powering down to avoid loud noises.
Specifications
Power supply
16Vdc, 4A power adaptor (included)
Output power @ 4 Ohms
2 x 30W
Output power @ 8 Ohms
2 x 15W
Microphone : connector
XLR
Auxiliary input
Stereo 3.5mm jack
Speaker outputs
Screw terminals (removeable Euroblock)
Dimensions
450 x 140 x 100mm (assembled)
Weight
552g
Disposal:
The “Crossed Wheelie Bin” symbol on the product means
that the product is classed as
Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted. Copyright© 2022. AVSL Group Ltd.
Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland
