4 . Interface & IP Initization
IP Initialization
Dimension
3. Specification
5. IP Manager
3 MEGA PIXEL
HD NETWORK
IR DOME CAMERA
USER’S MANUAL
Design and specifications are subject to change without notice.
HD NET
WORK IR DOME C
AMER
A
IP3-003
10) Check the Status
11) Try again for the failed cameras
8) Confirm if the changing values are correct.
9) Click Change
6) If you want to change many IP addresses, you can enter the starting
IP address and the ending IP address, and enter each increasing step.
7) Click Save
5) Click Batch
You can do all the settings about network by IP Manager.
1) Run IP Manager
2) Click Find
3) Choose the cameras you want to change
4) Click Change
CAMERA SECTION
IMAGE
Image Sensor
1/2.8” Sony Exmore 3MP Image Sensor
Scan System
Progressive Scan
Total Pixels
2144(H) x1588(V), 3.40 Mega Pixels
Effective Pixels
2048(H) x1536(V), 3.14 Mega Pixels
Function
Day & Night
Auto/Day(Color)/Night(BW)
Privacy Area
On/Off (6 Programmable Zone)
WDR
DWDR (1~5Step)
DNR
1~63
Motion Detector
48 Zone (On/Off, 1~5Step)
Elec. Shutter
Auto(1/15~1/10000),
Suppress Rolling, Manual
Sense Up
1~6 Step
White Balance
Auto/Indoor/Outdoor/Fluorescent
Ext. Video
VBS1.0Vp-p
Lens
Focal Length
2.8~10 Mega Lens
IR LEDs
IR LEDs
35 units
Night View Distance
25m
Electrical
Power Supply
DC12[V] ±10% / POE
Current
Max 650mA
Environmental Operating Temp.
-10
℃
~ +50
℃
Preservation Temp.
-20
℃
~ +60
℃
Humidity
0% ~ 90%
Mechanical Weight
Approx. 1,050 g
NETWORK SECTION
System
OS
Embedded Linux
Network
Interface
RJ45 100/100 Base-T PoE
Protocol
TCP/IP,UDP/IP,RTP,RTSP,RTCP,NTP,
HTTP,DHCP,FTP,SMTP,DNS,DDNS
Onvif
ver2.0
DDNS
iplinker.net
Simultaneous Access
Max. 10 user
Video
Compress Format
H.264/MPEG4/MJPEG
Resolution
2048×1536/1600×1200/1920×1080/
1280×1024/1280×720/640×480
Frame rate
5fps ~ 15fps @ all resolution
Video Quality
H.264,MPEG4 : Bitrate Control
MJPEG : Quality Level Control
Streaming
Triple Stream (Stream1,2,3)
RTP/RTSP, UnicastRTP, Multicast RTP
Audio
Compress Format
G.711 u-law
Streaming
Two way
Event
Sensor In
1 (Digital Input)
Alarm Out
1 (Digital Outut, Open Collector)
Web
Manager
IE, Firefox, Safari, Opera
Browser
Viewer
IE only (Active-X)
IP Address
192.168.1.30
Gateway
192.168.1.1
Subnet mask
255.255.255.0
I D
admin
Password
admin
Web Port
80
RTSP Port
554
unit :mm
Factory
Default
* You should change the ID and Password after purchasing.
* You will be responsible for all the damages unless you change the ID and
Password.
Service Video
Power
Audio Out(yellow)
GND (Black)
Audio In(White)
LAN Cable
Sense In (Yellow)
GND (Black)
Alarm 12V Out (Red)
Alarm Out (White)
■
Sony 3Mega Pixel Image Sensor
■
Triple Codec (H.264/MPEG4/MJPEG)
■
Triple Stream
■
Support Onvif
■
Support POE
■
IR LED : 35 units 850nm Infrared LED, 20,000hrs
■
Night View Distance : Indoor 35 / Outdoor 25m
■
Sense-Up (x6)
■
True Day & Night(ICR)
■
True 3-Axis Easy Ball type Gimbal Bracket built-in
■
Built-in Heater & Blower
■
Weatherproof (IP68)
9)
8)
6)
7)
2)
3)
4)
2)
3)
4)
Components & Dimension
SCREW
SIDE CAP
Mounting Template
Manual
L-WRENCH
SUPER
WDR/3D DNR
DOME CAMERA
USER’S MANUAL
SUPER
WDR 3D DNR
■
■
■
■
■
■
■
■
■
■
■
■
■
Sony 1/3” Color Vertical Double Density CCD
Sony 1/3” SuperHAD II CCD
960H CCD (700TV Lines)
High Resolution 600TV Lines
High Resolution 700TV Lines(960H)
WDR(Wide Dynamic Range)
3D DNR(Digital Noise Reduction)
Sens-Up Function(x512)
Eclipse Function
RS485 ( PELCO-D) Optional
UTP Interface Optional
Heater & Blower Option
35pcs IR LED Vandal Dome Camera or
Non-IR LED Vandal Dome Camera
Flush or Surface Mounting Type
True 3-Axis Easy Ball Type Gimbal Bracket built-in
IP67 rate Waterproof Design
70.0
109.
0
Mounting Template
Surface Mount
Surface Mount
3/4” Cap (2EA)
Plastic Anchors
Surface Mounting Screws
M4 x 30
10
11
12
13
14
15
16
1
Bubble
Dome Cover
2
Assembly Torx Screw
M4 X 9(3EA)
Flush Mount Base
7
8
9
Heater & Blower Board
(Optional)
Assembly Screw(Surface Mount)
M4 X 10 (4EA)
Lens
3
Bracket
6
Surface Mount
Fix Screw
LEDs
4
Gimbal
5
Safety Cable
1. Names and Functions of Parts
2. Installation
Surface Mount Installation
UNLOCK
LOCK
STEP :
1. Mount the surface mount
plate to a sturdy surface or
wall with the installation
template (mouting screws
M4 x 30).
2. Connect the pre-drilled two
screws in the flush mounting
ring through the locking
hole( ) and turn it
counterwise for the
temporary locking system
before drilling four screws
(M4 x 10) of flush mount ring.
Please check if the symbol
in the surface mount ring and
the square hole ( ) in the
flush mount ring meet in a line
when it is locked.
3. Screw with four screws
(M4 x 10) from flush mount
ring to be mounted with the
surface mount.
4. Adjust the lens focus and zoom
of camera to monitor the objective.
5. Fit three screws(M4 x 9) from dome
cover ring to the flush mount ring
and fix it by (3) screws. When you fit
the dome cover ring please fit the
symbols in the line.
1
2
3
1
2
3
Surface Mount Ring (Symbol)
Flush Mount Ring Square Hole
Dome Cover Ring (Symbol)
70.0
109.0
9.0°
174.7
85.1
91.3
R101.6
R51.6
9.9
4.5
56.7
PF 3/4”
113.0
