AVS Electronics FOGGY, Руководство пользователя

Страница: 24 / 60

- 24 -
Installation
Foggy can be installed both on the wall and on the ceiling. Its installation is simplified thanks to a support bracket
that the central block of the fog generator is attached to and a pulley (optional KIT MOD.LFT)
that makes a ceiling installation easier.
In order to lessen the aesthetic impact, Foggy can also be installed inside drop ceilings or wall cupboards, as long
as sufficient aeration is guaranteed in order to disburse the heat and a small opening is left in correspondence of the
nozzle in order to allow the fog spray to come out. In order to achieve this, if necessary, it is possible to use the
extension (optional KIT MOD. PRL10).
In order to achieve optimal per-
formance, it is recommended to
keep FOGGY at a minimum
distance from the objects to be
protected.
min. 35 cm
2.50 m
2.50 m
NO
!!! ATTENTION !!!
For horizontal wall
installation, the nozzle must
be positioned on the left side
while for vertical wall must
be positioned on top side.
Based on the type of
installation, keep a minimum
distance of at least 10 cm
from the wall or ceiling.
!!! ATTENTION !!!
Due to the high temperature at which
the fog is disbursed, it is necessary to
respect a minimum safety distance from
persons or equipment in order to avoid
buns or damage.
YES
min. 10 cm
min. 10 cm
CEILING
W
ALL
E
N
G