AVProEdge ConferX AC-CX62-AUHD, Руководство пользователя

Страница: 11 / 21

Audio Wiring Diagram:
Audio Output Logic and Cable Prep:
You can extract audio from toslink or balance 2CH Audio. Audio outputs are an un-decoded output. This
means that what goes in, is what goes out.
2CH Balanced Audio Port - Supports 2CH PCM audio only, which is ideal for 2 Channel systems and zoned
audio systems.
Toslink Audio Port - Supports PCM, LPCM (up to 7CH), Dolby Digital, Dolby Digital Plus, DTS, DTS-HD, DTS
Master Audio, which is ideal for multi-channel audio systems and older AVR's that do not support 18Gbps.
Need to down-mix for combination, uncompressed and 2CH systems? Check out the AC-ADM-AUHD and
AC-ADM-COTO.
You can use balanced analog outputs in a balanced system, but you can also prep a cable as shown below
to to convert to a traditional 2CH unbalanced (L/R) system.
You can also purchase pre-made cables (AC-CABLE-5PIN-2CH)
*NOTE: Make sure ground is always connected
AC-CX62-AUHD
Page 11