AVProEdge ConferX AC-CX100-RAMP, Руководство пользователя, Страница: 13 / 20

■
IR Configuration
IR can be used in three ways:
From Rack (Control System Direct): Plug a MONO 3.5mm cable into an emitter port of any control system directly into
the "I
-PASS " port on the AC- C X 100 - RAMP to pass IR signals directly to the remote end
From Rack (Using IR-EYE): Plug an IR-Receiver Eye into the "IR IN" of the AC-CX100-RAMP in order to pass infrared
signals generated from a device or IR Remote to the remote end
From Remote End: Use an IR- Emitter on the AC-CX100-RAMP (IR OUT Port) in order to get IR signals BACK to the rack
from the remote end
AC-CX100-RAMP
Page 13