background image

Safety Instructions:

After Sale Service

:

To ensure reliable operation of these products as well as protecting the safety of any person using or handling 

these devices while powered, please observer the following instructions.

1.

Use the power supplies provided.  If an alternate supply is required, check Voltage, polarity, and that it
has sufficient power to supply the device it is connected to.

2.

Do not operate these products outside the specified temperature and humidity range given in the above

specifications.

3.

Ensure there is adequate ventilation to allow this product to operate efficiently.

4.

Repair of the equipment should only be carried out by qualified professionals as these products contain
sensitive devices that may be damaged by any mistreatment.

5.

Only use these products in a dry environment.  Do not allow any liquids or harmful chemicals to come
into contact with these products.

6.

Due to the weight and physical size of some of these matrix switchers, correct Manual Handling and
Lifting procedures should be observed at all times while handling these products in order to minimize the
risk of injury.

1.

Should you experience any problems while using this product, firstly refer to the Troubleshooting section in this
manual before contacting Technical Support.

2.

When calling Technical Support, the following information should be provided:

Product name and model number

Product serial number

Details of the fault and any conditions under which the fault occurs

3.

This product has a two year standard warranty, beginning from the date of purchase as stated on the sales invoice.
Online registrtation of this product is required to activate the full three year extended warranty.  For full details
please refer to our Terms and Conditions.

4.

Product warranty is automatically void under any of the following conditions:

The product is already outside of its warranty period

Damage to the product due to incorrect usage or storage

Damage caused by unauthorised repairs

Damage caused by mistreatment of the product

5.

Please direct any questions or problems you may have to your local dealer before contacting AVProEdge

AC-MX88-UHD-GEN2

Page 18

Содержание AC-MX88-UHD-GEN2





























Отзывы: