AC-MX44
/88
-AUHD-HDBT
pg.
7
AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
Front Panel Control
Switching:
The AC-MX44
/88
-AUHD-HDBT can be switched from the front panel by selecting the OUTPUT
button first and then selecting the INPUT button:
1.
Press the button (1 through 4) on the bottom row that corresponds with the OUTPUT
(Display, or Sink Device) you would like to send to a source.
2.
Once pressed, the switch will illuminate the OUTPUT button that you have selected,
along with the INPUT row (as pictured), indicating that it is ready for you to select
the INPUT.
3.
Select the desired INPUT.
Figure 1 – Switching with the front panel controls. NOTE: Select the OUTPUT and then the
INPUT.
Scaler Control:
The AC-MX44
/88
-AUHD-HDBT has scalers built into every output. The HDbaseT Port can
be DOWNSCALED and the HDMI Port can be UPSCALED. The scalers are set on the
OUTPUT side of the switch and each can have separate settings. Control the scaler:
•
HD-4K (Scales 1080P to 2160P - On HDMI Port Only)
•
ICT Mode (Enables ICT Compression mode on HDBT Port) - DEFAULT
•
4K-HD (Scales 2160P to 1080P - On HDBT Port Only)
•
AUTO (Automatically detects capabilities of attached display - for HDBT Port Only)
•
BYPASS (There will be no scaling set)
NOTE: When using a non ICT receiver the unit automatically applies HDBT-C mode
when ICT mode is selected, which reduces 10-18Gbps content to 9Gbps for legacy
infrastructures. This mode maintains 4K resolution, but removes HDR.
Select OUTPUT First
Select INPUT Second
STEP 1:
Press and hold the
desired output you
want to scale
STEP 2:
Choose the scaler
mode
The LCD Screen
shows current
status
