©AVProEdge | 2222 E 52nd Street N Sioux Falls, SD 57104 1.877.886.5112 | +1.605.274.6055
6
5. Package contents:
1.
Main unit: AC-DA210-HDBT
2.
48V2A power supply for powering AC-DA210-HDBT
6. Operation controls:
Switching:
The AC-DA210-HDBT can be switched from the front panel by pressing the “Input”
button. This switches back and forth from Input 1 and Input 2
EDID management:
1.
Pressing and holding the button for more than 3 seconds will enter an EDID
management mode.
2.
When in EDID management mode the HDMI out LED’s 1&2 will be flickering.
3.
HDBT out LED’s 1 through 5 are used to identify the EDID setting.
4.
Press the button to cycle through the available EDID’s
5.
Press and hold for 3 seconds again to set the selected EDID
a)
If all LED’s light up it is successful, and press the button once more to return to
normal operating mode.
b)
If all LED’s are flickering, the setting failed. Press the button to resume normal
operating mode and try again.
6.
The table below (Page 7) shows the different EDID options.
