EDID Setting Cont. (Notes):
Note1
: EDID Copy mode: EDID will be copied from sink on OUTPUT 1. The
AC-DA18-AUHD is set this way by default for maximum “Plug & Play”
Compatibility. If you change sink (Display) plugged into OUTPUT 1, please
follow the steps below if you wish to use the new sink’s EDID.
1.
Start with power off
2.
Set ROTARY SWITCHES to ‘00’.
3.
Power on the unit
4.
Power on the source device and connect the HDMI input port.
Note2
:
Cascading mode (Ideal for larger installations) Cascade mode does
not react to the EDID from the sink device. It sends the signal that you put in,
out. This is ideal for linking multiple units together. The method below is an
ideal way to use this function effectively.
To use cascading mode:
1.
Start with power off
2.
Fix an EDID on the FIRST unit in the series from the list above
(4K60, 4K30, 1080P, etc…)
3.
Set the ROTARY SWITCHES on all subsequent units to “31”
4.
Connect the source device
5.
Power up the system
AC-DA1
8
-AUHD
pg.
1
0
AVProEdge ~ 2222 E52nd Street N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
