1
3
AC-
EX
100
-UHD
■
Audio Extraction
on AC-EX100-UHD-T (Transmitter)
Audio Extraction is an always active feature on the AC-EX100-UHD-T.
This feature extracts PCM Audio Only (2ch or 6ch) from the source
device to be ran to a separate amplifier or AVR. BOTH the audio ports
are always active (balanced stereo & SPDIF).
To use the ports:
1.
Simply plug a balanced stereo 5 pin or SPDIF Digital Coax cable in
to begin extracting audio. (Please view photo for port locations)
2. You can optionally buy pre made Balanced 5-pin to RCA Female
cables from AVProStore.com
NOTE: The source device needs to be outputting PCM audio in order
for the feature to work, this can be done by using the on-board
EDID management or setting the source as such.
Tx
Balanced
Stereo
SPDIF
(Digital Coax)
