AVPro Edge AC-EX40-444-KIT, Руководство пользователя

Страница: 19 / 22


Troubleshooting
•
Verify Power -
o
Verify Red P ower LED is on , Transmitter - Pg. 5
o
Verify Red Power LED is on, Receiver - Pg. 9
•
Verify Connections - Check that all cables are properly connected
o
TX Indicator Troubleshooting Lights - Pg. 5 - 6
o
RX Indicator Troubleshooting Lights - Pg. 9 - 10
•
Verify signal from TX to display by enabling the TEST PATTERN Generator - Pg. 8
o
Test Pattern works but source still not displaying, try another canned EDID.
Default out of the box is EDID BYPASS, try a different EDID or copy the EDID
from the display - Pg. 6 - 7
•
Extracted Audio Issues - Pg.1 3 - 1 4
o
Verify Source is set to output 2ch PCM
*
NOTE: This unit does NOT downmix
•
IR Issues - Verify correct connections - P.1 5 - 1 6
o
Visibly flashing Emitters may not function properly, try the IR Cables that
come in the box
•
Still having issues, contact us
o
Support Direct - +1-605-977-3477
o
All inquiries - +1-605-274-6055
o
Submit a support request ticket

https://support.avproedge.com/hc/en-us/requests/new
AC-EX40-444-KIT
Page 19