Avonic CM61-IP Скачать руководство пользователя страница 6

Страница: 6 / 80

www.avonic.eu

Introduction

Congratulations

Thank you for purchasing the Avonic CM61-IP HD PTZ Camera. Before beginning to operate

this device, please read the manual in order to make sure the best performance is obtained.

Save this manual for future reference.

Safety Notes

•

Installation and servicing should only be done by Qualified Service Personnel and conform

to all local codes.

•

This unit is designed for indoor use only and it must not be installed where exposed to

water or other liquids and moisture.

•

Before powering on the device, check the input power voltage carefully.

•

Avoid shock and vibration when transporting and installing the device.

•

Use wall mount brackets or ceiling mount brackets available at Avonic for safe installation.

•

Electronic devices produce heat. Do not block the ventilation slots of the device and

make sure the installation environment is well ventilated to avoid overheating.

•

Before cleaning, unplug the power cable. Use a soft, damp cloth to clean the device,

do not use strong or abrasive detergent to clean that will damage the device.

•

If you wish to dispose this product, please contact Avonic to obtain info about the take-

back procedure.

Содержание CM61-IP

















































































Результаты поиска

Содержание CM61-IP

Отзывы:

Бренды по названию

Популярные бренды

Avonic CM61-IP, Руководство пользователя

Результаты поиска

Содержание CM61-IP

Отзывы:

Бренды по названию

Популярные бренды