AVOCOR AVF-6500 Series, Руководство по установке и эксплуатации

Страница: 46 / 84

46
Audio Settings
Volume:
Select Volume from the Audio Settings menu and press ◄ or ► to change the audio volume.
Bass:
Select Bass from the Audio Settings menu and press ◄ or ► to cut or boost the low audio
frequencies.
Treble:
Select Treble from the Audio Settings menu and press
◄ or ► to cut or boost the high audio
frequencies.
Balance:
To adjust the left/right speaker balance, select Balance from the Audio Settings menu and press
◄ or ► to make one channel louder than the other.
HDMI Audio Input:
If you are using one of the HDMI inputs with a PC or other device that does not support audio
output via HDMI, set HDMI Audio Input to PC for that input. (Also connect the audio output from
your source as shown in Figure 3-5.) This setting associates the PC Audio In input with that HDMI
input.
DP Audio Input:
If you are using the DisplayPort input with a PC or other device that does not support audio
output via DisplayPort, set DP Audio Input to PC for that input. (Also connect the audio output
from your source as shown in Figure 3-5.) This setting associates the PC Audio In input with the
DisplayPort input.
Internal Speakers:
Set Internal Speakers to Off to disable the internal speakers on the display. Set it to On to enable
them.