Avocent Cyclades ACS, Инструкция по установке/администрированию/использованию

Страница: 148 / 212

132 Cyclades ACS Advanced Console Server Installation, Administration and Users Guide
b. To select multiple ports in a range, click the first port in the list and then hold down the
Shift key while selecting another port or ports.
c. To select multiple ports that are not in a range, click the first port in the list and then hold
down the
Ctrl
key while selecting another port.
3. Go to the desired procedure from the following list.
To enable or disable serial ports:
1. Go to Ports - Physical Ports and select a port or ports to modify.
2. To enable selected ports, click the Enable Selected Ports button.
3. To disable selected ports, click the Disable Selected Ports button.
NOTE: By default, all Serial Ports are disabled from the factory. The Administrator can activate and assign
specific users to individual physical ports.
4. Click apply changes .
General form
Under Ports - Physical Ports in Expert Mode, if you select one or more ports from the ports list and
click the Modify button, the General form appears as shown in the following form.
Table 9.7: List of Procedures for Serial Port Configuration
To enable or disable serial ports: on page 132
To configure a serial port connection protocol for a console connection: on page 136
To configure user access to serial ports: on page 141
To configure data buffering for serial ports: on page 144
To configure multiple sessions and port sniffing for one or more serial ports: on page 146
To configure a serial port for IPDU power management: on page 148
To configure a user for IPDU power management while connected to a serial port: on page 149
To configure TCP port number, STTY options, break interval and the login banner for a serial port connected to
a console:
on page 151