Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 118 / 144

106 AVWorks Installer/User Guide
VT102 terminal emulation
VT102 terminal emulation works identically to VT100 with additional support for decoding
receive codes as described in Table C.2.
VT100 terminal emulation
Table C.3 lists the VT100 special key and
Control
key combinations and indicates Avocent
encoding/decoding support, where Yes indicates supported and No indicates not supported.
Table C.2: VT102 Receive Codes
VT102 Receive Code Action
Delete Character
(DHC)
Deletes n characters starting with the character at the current cursor position,
and moves all remaining characters left n positions. n spaces are inserted at the
right margin.
Insert Line (IL)
Inserts n lines at the line where the cursor is currently positioned. Lines displayed
below the cursor position move down. Lines moved past the bottom margin are lost.
Delete Line (DL)
Deletes n lines starting with the line where the cursor is currently positioned. As lines
are deleted, lines below the cursor position move up.
Table C.3: VT100 Special Keys and Control Keys
Keys Hex Code Function Mnemonic Encode/Decode
Return 0D CR Yes/Yes
Linefeed 0A LF Yes/Yes
Backspace 08 BS Yes/Yes
Tab 09 HT Yes/Yes
Spacebar 20 (SP) Yes/Yes
Esc 1B ESC Yes/No
Ctrl+Spacebar 00 NUL Yes/No
Ctrl+A 01 SOH Yes/No
Ctrl+B 02 STX Yes/No
Ctrl+C 03 ETX Yes/No
Ctrl+D 04 EOT Yes/No
Ctrl+E 05 ENQ Yes/No
Ctrl+F 06 ACK Yes/No