Page 18
Run the IIoT Bluemix Demonstration
This demonstration builds on the Quickstart application, adding these features:
Published data requires security credentials to connect to a Bluemix application
The Bluemix application processes published data and communicates analytic results
back to the IIoT Kit through a callback registration mechanism
Incoming results from Bluemix are received by the application and the User LED on the
MicroZed is accessed to convey status information
Your IIoT kit must be connected to the Internet for this demonstration to operate correctly, and
you must have registered with IBM Watson IoT to set up your own Bluemix account. If you have
not done so, to access your Bluemix trial and obtain a promotional code to access Avnet online
training at no charge, please visit:
http://artofthepossibility.com/bluemix-free-trial
Once you have your Bluemix account, you will need to configure the Watson IoT broker and
bind it to a running Bluemix application. For first time operation, see
Appendix I
for step-by-
step instructions.
1. Ensure that your Cloud (Bluemix) application is running, as described in
Appendix I
.
2. To run the IIoT Bluemix demonstration, at the command prompt for the IIoT Kit enter:
./IIot_Bluemix_Demo
The application will read temperature and humidity values from the HTS221 sensor on the
Shield and transmit data to your Bluemix service.
Содержание MicroZed 7010
Страница 17: ...Page 17 ...
