Avnet COM Express MSC C6B-SLH Скачать руководство пользователя страница 122

Страница: 122 / 144

MSC C6B-SLH

MSC C6B-SLH User Manual

122 / 144

6.17

Blind Restoration of Bios default settings (no display available)

1. Power up the System

2. Repeatedly press

[DEL]

for several seconds

3. Press

[F3]

for default settings or

[F2]

for previous values.

4. Press

[Enter]

5. Press

[F4]

6. Press

[Enter]

7. System will restart

8. Alternatively, it is possible to restore Bios defaults by shorting two pins on the module. See chapter 6.18.

6.18 Bios Recovery

If a Bios update will be interrupted (e.g due to power loss) and the update has not been finished, it can happen that the system will not boot. In this case
it is possible to restore the Bios with the following method:

1. Prepare the SPI Image (flashimg.bin) as described in section

6.13

2. Power on the system.

3. Bios will search for the file and if found a Bios recovery will be started.

4. After Bios recovery is finished the system will perform a powercycle and the system should boot normal again without the recovery medium

It is also possible to initialise the bios recovery by shorting the recovery pins on the module as described in chapter



NOTICE: During Bios recovery there is no video output. Users have to wait until power cycle will be performed. So it is recommended to wait some

minutes until power cycle is performed.

Содержание COM Express MSC C6B-SLH

















































































































































Результаты поиска

Содержание COM Express MSC C6B-SLH

Отзывы:

Похожие инструкции для COM Express MSC C6B-SLH

Бренды по названию

Популярные бренды

Avnet COM Express MSC C6B-SLH, Руководство пользователя

Результаты поиска

Содержание COM Express MSC C6B-SLH

Отзывы:

Похожие инструкции для COM Express MSC C6B-SLH

Бренды по названию

Популярные бренды