Avnet AT&T Cellular IoT Kit, Руководство по началу работы

Страница: 21 / 36

Page 21
Importing, Compiling, and Programming
AT&T IoT Kit Software
You are not required to import and compile the IoT Kit software as it can be downloaded and
loaded into the IoT Kit from
http://cloudconnectkits.org/att-quickstart-binary .
If you download the binary, the IoT Kit will only interact with the example Flow program. To use
the binary, download it and extract it to a destination folder and jump to the
Programming
section. Otherwise, continue with this section.
To create your cellular application project to run on the FRDM-K64F board, log into your
mbed.org account and navigate to
https://developer.mbed.org/teams/Avnet/code/Avnet_ATT_Cellular_IOT/
Select the Import this Program button. Your screen should appear as follows:
After clicking the Import button, the development environment opens and the code for the
FRDM-K64F board is imported. A dialog box (as shown below) appears. Accept the defaults.
Note: please use mbed tagged versions of source and libraries to ensure proper behavior, first
import the tip revisions and then revert your project to a tagged revision. This is accessible from
the “Revision” button in the compiler interface. After generating revisions, then Right-Click on
the tag and choose “Revert working copy to this revision”
Compiling