Avnera Corporation
Samsung Module Manual
Samsung Module PRD
AVNERA CONFIDENTIAL
page 4 of 10
- Time base of the RF frequency
For Zero IF and RF frequency, a crystal (16MHz) is a clock reference.
- Synthesizer
Synthesizer inside transceiver internal voltage controlled oscillator (VCO) provides the desired LO
Signal base on the phase-locked loop (PLL) with a relatively wide tuning range for this application.
- Transmission
In transmit mode, the audio engine controlled I2S, transforms the audio data into packetized digital IQ
signals. These are in turn pulse-shaped before conversion by a 10 bits 44Msps DAC to match to the analog
IQ inputs of the radio IC. The radio IC has programmable baseband filters to lower the RF spectrum side
lobes and to suppress the DAC image and the DAC spurious. The output power is programmable. A power
detector (PD_out) on the radio IC enables close-loop TX power control. The differential RF PA outputs are
connected via a balun and low pass filter to a transmit/receive switch with TX diversity option to the
antenna outputs.
- Receiver
In receive mode, antenna diversity is supported. The single ended output of the TR switch is connected
to the RF LNA input through a matching network. Filtering and amplification is all performed by the
radio transceiver. The gain setting is controlled by the BB. The analog IQ outputs are sampled by the
BB by its integrated 22 Msps dual channel 8bit ADC. This received data is demodulated and fed to the
audio processing engine controlling the I2S connections.
- Power Control Level
The integrated PA for this device can transmit at a maximum power of +4dBm for class 2 operation.
- Transmit/Receive Switch
DUT has Transmit/Receive Switch. End user can’t select any power setting.
4.
Application for Wireless audio module
The application for the Tx and Rx modules is for the wireless link between a Samsung Sound Bar and a sub-
woofer
.
