AVM OVATION MA 8.3, Руководство по эксплуатации

Страница: 13 / 25

Getti ng star ted
10 OVATION MA / SA 8.3
Since the MA 8.3 delivers over 1000 watts of power, high vol-
tages can occur at the loudspeaker terminals. Therefore, do
not touch the terminals of either the power amplifier or the
loudspeaker during operation. If you want to change or
reconnect the speaker cables, first switch off the power
amplifier using the mains switch (8).
We recommend owners of SA 8.3 also follow the above inst-
ructions.
Make sure small children or pets do not touch the terminals
or speaker cables while the system is in operation. To con-
nect speakers to the output jacks (10), use only good quality
speaker cables of sufficient cross-section. If in doubt, ask
your dealer to recommend the best cable for your speaker.
Make sure the polarity is correct when connecting the spea-
kers. The red output terminals (10) must be connected to the
red speaker terminals or to the speaker terminals marked with
a plus sign. On the SA 8.3, the right and left channels must
have the same polarity of the loudspeakers for optimum
sound reproduction.
If you are using banana plugs, turn the outer parts of the
speaker terminals tight (to the right) before plugging them in
so that they do not cause annoying rattling noises at a later
time. If you want to contact bare cable ends or cable lugs,
turn the outer parts of the speaker terminals to the left as far
as they will go, inser t the stripped cable ends or cable lugs
from below into the openings provided in the speaker termi-
nals and then tighten the outer par ts of the speaker terminals
by turning them to the right.
To take full advantage of the monoblock concept, we recom-
mend you place the MA 8.3 as close as possible to the
respective loudspeaker. This results in shortest possible dis-