AVM OVATION A 6.3, Руководство по эксплуатации

Страница: 15 / 32

OVATION A 6.3 / 8.3 11
B asic operat ion
remote control is deactivated for safety reasons (e.g. acci-
dentally turning up the volume to maximum etc.).
2.5 Input sensitivity (Level Setting)
The level of different signal sources often varies by several
dBs resulting in unpleasant increases/decreases in volume
when switching between inputs. This may be avoided by
adjusting the input sensitivity of respecting sources.
Use the source selector (2) to choose an analog or digital
input or
BLUETOOTH and set the volume (6) to a convenient
level. If you now notice an unpleasant increase or decrease in
volume after switching to another local input by turning the
source selector (2), press the menu button
MENU under the
display for more than two seconds. Now you can switch bet-
ween different sources with the source selector (2) and
adjust the levels of your analog and digital sources including
BLUETOOTH by turning the volume knob (6). The sensitivity of
each input can be adjusted between -9.5 dB and + 10.0 dB.
Pressing the menu button
EXIT LVL under the display will
save your settings and bring the unit back to normal operating
mode.
2.5.1 Level adjustment of digital inputs
To adjust the input sensitivity of a digital input, a digital sig-
nal must be connected to the respective input. If you select a
digital input that has no valid signal,
NO DIG SIGNAL or NO
USB PLUGGED is shown on the display (5) and the MENU but-
ton under the display leading to the sensitivity setting menu
(see section above) is deactivated.