AVM FRITZ! Powerline 1260E, Установка и эксплуатация

Страница: 7 / 44

Expanding the Wireless Network with FRITZ!Powerline
Here is how to use FRITZ!Powerline 1260E as a WLAN repeater.
1. In the web browser, enter the address http://fritz.powerline . The FRITZ!Powerline
1260E user interface opens.
2. Select Access to the Home Network and click Change Connection Type .
3. Select Wireless Bridge and click Next . A Wizard takes you step by step through the
con fi guration of FRITZ!Powerline 1260E.
4. At the end of con fi guration, click Finish .
5. Select Powerline , disable the Powerline active checkbox, and click OK .
6. Connect your wireless LAN and network devices with FRITZ!Powerline 1260E.
LEDs and Buttons
Condition Meaning
WLAN
on Wireless LAN enabled
o ff Wireless LAN disabled (in the user interface)
fl ashing
in “Wireless Bridge” mode: Searching for the access
point
Powerline
on Connected with the powerline network
o ff
No connection with the powerline network, or power-
line switched o ff (in the user interface)
Connect
Flashing
along with
“WLAN” and
Powerline
 FRITZ!Powerline is being integrated into the
FRITZ!Box’s Mesh WiFi
 Receiving or transmitting the password of the
powerline network

Performing WPS (Wi-Fi Protected Setup)
 Restart
Press Connect for
Integrating FRITZ!Powerline into the network /
Triggering WPS / Enabling Mesh WiFi
1 second
Loading factory settings longer than 15 seconds
WLAN
Powerline
Connect
Powe
r/DSL
WLAN Fon/
DECT
Connec
t/WPS
Info
WiFi WiFi
12 13