AVM Fritz!Box 3490, Руководство по конфигурации и эксплуатации

Страница: 102 / 147

FRITZ!Box 3490 102
Network Settings in the FRITZ!Box
•
Fixed IPv4 addresses are registered in the network set-
tings of the computer, and you do not want to or are not
permitted to change these addresses.
•
You want to connect the FRITZ!Box to the local IPv4 net-
work in order to make the FRITZ!Box features available to
all of the computers in the IPv4 network.
Reserved IP Addresses
The entire IP network 192.168.180.0 in the FRITZ!Box is re-
served for internal purposes.
IPv4 addresses from this network may not be assigned to the
FRITZ!Box.
DHCP Server for IPv4
The FRITZ!Box is equipped with its own DHCP server for the
IPv4 network. The DHCP server is enabled by default in the
factory settings. The following range of IP addresses is re-
served for the DHCP server in the factory settings:
192.168.178.20 – 192168178200
This IP address can be changed as needed.
Every time the operating system on a computer connected
with FRITZ!Box is started, the DHCP server assigns it an IPv4
address from the IP address range of the DHCP server.
Only one DHCP server may be active within any network.
Assigning the IP addresses via the DHCP server ensures that
all of the computers connected with the FRITZ!Box are located
in the same IP network.
The computers can receive their IPv4 addresses from the DHCP
server only if the setting “Obtain an IPv4 address automatical-
ly” is enabled in the their IP settings. For more information, see
the chapter
Obtaining an IP Address Automatically from
page 105 .