14
4.4.4
User Settings
The menu item "Settings" offers a series of useful functions which can be accessed by pressing the
Navigation keys (11), the Enter key (10) or the alphanumeric input keys (25).
NOTE
: The left Navigation key (11) is used to delete entered characters and numbers. The blue Option
key (5) is used to toggle between upper and lower case characters.
Name
This option allows you to customize the name of your RC 9 remote control.
Time
The option "Time" enables you to to adjust the time settings of your RC 9 remote control. Hours and
minutes are displayed in individual rows.
Stand-by
The option "Stand-by" allows you define the amount of time until your RC 9 remote control switches to
stand-by mode. The preset value of 60 seconds can either be reduced to a mininum of 10 seconds or
increased to a maximum of 300 seconds (= 5 minutes).
Time in cradle
If the option "Time in cradle" is enabled, the RC 9 remote control will display the current time on its
colour display when placed in the cradle (included docking station). Please note that the "Time in
cradle" option is not available when the RC 9 remote control is being charged via the USB cable.
Brightness
Choose between three different brightness levels of the colour display. All changes are applied
immediately after selection.
HKEY Configuration
HKEY Configuration allows you to assign four different devices to the four available Hotkeys (4) of your
RC remote control. This way, you can comfortably select up to four devices of a currently active zone
with the touch a single button.
Please note that only one device can be controlled by the RC 9 remote control at a time. If you happen
to choose another device from the Hotkeys menu, the connection to the formerly linked device will be
interrupted.
Change language
Choose one of the currently available languages of your RC 9 remote control: English, German, French,
Italian, Spanish, Dutch. The RC 9 remote control will automatically change its language once selected.
Rename device
The menu item "Rename Device" provides the option to rename a paired device by using the
alphanumeric input and navigation keys (25) (11). Please note that the renaming applies only locallly on
the RC 9 remote control. The device name via UpnP or anything similar will stay the same.
Delete Device
The menu item "Delete Device" contains a list of all formerly paired devices. When chosen a device,
this is deleted along with all known information. In order to add a deleted device again, please refer to
section 4.4.5.
Add Zone
The menu item "Add Zone" provides you with an option to create a new zone with an individual name.
In order to assign a device to a certain zone, please return to System-Settings/User-Settings and
chose the menu item "HKEY Configuration" (see above).
Rename Zone
The menu item "Rename Zone" lists all known zones and provides the possibility to rename them
(living room, kitchen, etc.) by using the alphanumeric input and navigation keys (25) (11).
