Avlite AvMesh, Руководство по установке и устранению неисправностей

Страница: 28 / 40

28
The Avlite wireless remote controller provides users with the ability to illuminate remote
runways in either the ‘Visible LEDs’ mode for normal runway operation or the ‘IR/NVG LEDs’
mode to support tactical operations.
Light groups are used to cluster lights in a particular area such as a taxiway so that they
can be controlled independently from other light groups such as a runway or helipad. The
Avlite Wireless Remote Controller offers 10 individual light groups (i.e. 0-9) as well as an
option to select all groups at once.
The intensity of the LEDs in the lights can be set at either low, medium or high based on
the users’ specifications (relative to 100% being specification level compliant).
The LED high intensity timeout feature allows the LEDs in the light to revert from high
intensity to low intensity after a defined period of time (i.e. timeout duration). The three
available timeout modes are described below:
Disabled
The high intensity LED timeout is disabled. The LED intensity will be selected via the LED
intensity menu.
5.1.4 Intensity
5.1.2 Advanced Op Mode
5.1.3 Light Group
NOTICE:
The light group selected in the Avlite Wireless Remote Controller
must be the same as the light group selected via the rotary switch in
the light head in order for the light to respond to the controller.
NOTICE:
• The LED Intensity is initially set ‘Low’ by default.
• The ‘LED Intensity’ menu is not available for the STANDBY
operational mode.
5.1.5 Timeout Mode
NOTICE:
This menu is not available if the STANDBY operational mode has been
selected.