Avlite AV23, Инструкция по установке и обслуживанию

Страница: 8 / 20

Latest products and information available at www.avlite.com
8
AV23 Solar Obstruction Light
Pulse settings on Avlite lights operate via DIP switches, located near the rotary switches on the flasher
unit. The pulse settings may be used to reduce the power consumption and intensity of the light.
Setting the light to 25% pulse will reduce the power consumption to 25% of the normal 100% setting
and the range by 50%. This setting may be used to adjust to local sunlight conditions.
The following diagrams indicate pulse settings:-
Power Consumption Calculator
If the number of Full Sunlight hours is greater than 3-3.5 hours, please consider reducing the intensity
(Power) or reducing the Duty Cycle.
All lights have 2 rotary switches marked A and B on the flasher unit. Turning the small arrows to the
appropriate number or letter will set the code (see ‘Flash Codes’ section, of this manual). The unit may
take up to one minute to activate a new flash code. A comprehensive list of available flash codes is
listed on pages in the ‘Flash Codes’ section of this manual.
Example:
100%
1 2
ON
75%
1 2
ON
50%
1 2
ON
25%
1 2
ON
Intensity
Setting
Power
mA / hour
100% 100
75% 76
50% 51
25% 26
4
5
6 7
8 9 A
B
C
D
EF0
12
3
4
5
6 7
8 9 A
B
C
D
EF0
12
3
A
B
SWITCH FLASH CODE ON OFF
A B
A 0 FL 3 S 0.3 2.7
Night Hours
(use 13.7 if
unknown)
Power
mA/hour
Duty Cycle
(e.g. 20% = 0.2)
Total power
used per night
(mA)
X X =
Total power
used per night
(mA)
Solar Panel
Charge
Number of Full Sunlight
hours required to
recharge battery
/ 456 =
Selecting an Intensity/Power Setting
Selecting a Flash Code - Rotary Switches A & B