Avlite AV-OL-KT-A1, Инструкция по установке и обслуживанию

Страница: 39 / 44

AV-OL-KT-A1 - Obstruction Light Kit
Installation & Service Manual
Latest products and information available at www.avlite.com 39
10.0 Troubleshooting
Problem Possible Cause Solution
L-864 beacon is out
(No Alarm)
No power to light • Check for voltage in Control
Box.
• Check controller to Beacon
cable connections at both ends.
Junction box wiring • Check junction box wiring.
L-864 beacon is
flashing white at night
Photocell input is
high
• Check wiring.
• Confirm there is 0 voltage at
the Photocell input.
Beacon in “limp
mode”
• Visually confirm Beacon is
flashing at ½ the intensity of
normal day mode.
A single L-810(F)
marker light is out
(No Alarm)
Marker wiring • Check the wiring of the
malfunctioning lamp.
Junction box wiring • Check junction box wiring.
All marker L-810(F)
lights out (No Alarm)
Junction box wiring • Check junction box wiring.
Cable to junction box • Check controller to junction box
cable connections at both ends.
• Inspect cable for breaks.
Light is out • No power to light
• Light failure
• Light in Alarm
Mode
• Physically check connections in
junction boxes and control box.
• If wiring functions properly, use
an alternate power source to
check the light.
• Replace light if necessary.
L-864 top light is not
operational
(no white or red
mode)
• Wired
incorrectly or
wire(s) lose
• Light failure
• No power to the
light
• Check wiring of light in top
junction box and Control Box.
• Measure voltage at junction
box. If correct input power,
replace light.
• If no voltage to the junction
box, check output power from
Control Box.