22
AV-OL-310 - DC Solar Powered Low Intensity Obstruction Light
Installation & Service Manual
Latest products and information available at
www.avlite.com
22
9.0 Trouble Shooting
Problem
Remedy
Light will not activate.
•
Ensure light is in darkness.
•
Wait at least 60 seconds for the program to initialise in
darkness.
•
Ensure Dip switch setting is correct
•
Ensure battery terminals are properly connected.
•
Ensure battery voltage is above 12volts.
•
Check the Status LED’s on the base of the PCB to
determine what type of fault the light is activating.
Light will not operate for
the entire night.
•
Expose light to direct sunlight and monitor operation
for several days. Avlite products typically require 2.5
hours of direct sunlight per day to retain full autonomy.
From a discharged state, the light may require several
days of operational conditions to ‘cycle’ up to full
autonomy.
•
Reducing the light output intensity will reduce current
draw on the battery.
•
Ensure solar module is clean and not covered by
shading during the day.
