AUSTRALIA
+61 (0)3 5977 6128
USA
+1 (603) 737 1310
www.avlite.com
AV-HL-FL_QSG_EN_V1-0
Test and secure
AV-HL-FL-PV models: Test the operation of the light by
using the Radio Controller
Close the PCB enclosure and Solar Assembly. Secure
the lid with the provided bolt.
AV-HL-FL-DC and UM Models: Test the Operation of the
lighting circuits in the Helipad Lighting System using the
Primary Helipad Controller (AV-HL-CTRL-T1 or AV-HL-
CTRL-T2)
Bolt the light to its final location.
Set the Light Group (PV Model Only)
or wire the Floodlight unit (DC and UM
Models Only)
AV-HL-FL-PV models: Determine to which group
each individual light belongs.
Set the light group by adjusting the Rotary Switch
A on the PCB to the appropriate light group (E.g. 0,
1, 2 etc).
AV-HL-FL-DC or UM Models: Wire the LED
Floodlight Unit into the daisy chain configuration via
the junction box. Follow the wiring instructions in
section 7.0 of the Installation Manual.
Need more information?
Please see the AV-HL-FL Installation and Service Manual for full wiring installation at www.avlite.com.
Alwa
y
s On
Dusk till Dawn
Junction Box (UM or DC)
Note:
Power and Data cables
can be wired into the junction
box from the left or right hand
side
Junction Box (UM or DC)
Note:
Power and Data cables
can be wired into the junction
box from the left or right hand
side
Internal wiring to Light
Head Assembly
Junction Box (UM or DC)
Note:
Power and Data cables
can be wired into the junction
box from the left or right hand
side
Internal wiring to Light
Head Assembly
PV Model
DC and UM Models
