AV-C310-ILA& AV-C410
Solar Powered ICAO Low Intensity Obstruction Light Type A
Latest products and information available at www.avlite.com
13
The IR remote is used to communicate with Avlite lighting products that have
an IR sensor fitted. The remote control is used for the following functions:
• Operational Mode: sets the Operational Mode, Always On, Dusk to Dawn
or Standby Modes.
• Ambient Light Thresholds: read the current light thresholds, configure new
ambient light thresholds.
• Perform a battery health check.
On receiving a valid key signal from the IR Remote, the light will flash once.
The user should wait until the light responds to each keypress before pressing
another key. If there is no response to the keypress after 3 seconds, it has not
been detected by the light and the key can be pressed again.
If an invalid key is detected, the light will flash quickly 5 times. In this case, the
command will have to be restarted.
If you lose your Avlite IR Controller, the following Universal Remote Controller has been tested for
compatibility: RCA Type RCR312WR programmed for Phillips TV Type Code 10054
Avlite Key
Universal
Remote Key
T
Power
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
0
R
L
Mute
FC
I
Volume-
B
Channel-
Optional IR Remote Control
Avlite IR Controller / Universal Remote Compatibility
Test / Configure
T/C
FC
I
B
