YX-1042 Matrix Switching System
—
User Manual
5.0.3 Remote Controller Key Operation
Push bottom 1, the output of OUTPUT 1 is the input of the first port and the upper bottom 1 on
the front panel will light.
Push bottom 2, the output of OUTPUT 1 is the input of the second port and the upper bottom 2
on the front panel will light.
Push bottom 3, the output of OUTPUT 1 is the input of the third port and the upper bottom 3 on
the front panel will light.
Push bottom 4, the output of OUTPUT 1 is the input of the fourth port and the upper bottom 4 on
the front panel will light.
Push bottom 5, the output of OUTPUT 2 is the input of the first port and the lower bottom 1 on
the front panel will light.
Push bottom 6, the output of OUTPUT 2 is the input of the second port and the lower bottom 2
on the front panel will light.
Push bottom 7, the output of OUTPUT 2 is the input of the third port and the lower bottom 3 on
the front panel will light.
Push bottom 8, the output of OUTPUT 2 is the input of the fourth port and the lower bottom 4 on
the front panel will light.
Push “SCAN MODE” to entry Auto Scan. Push”
▲
” can increase the time of Auto Scan,
push it once can increase 5 seconds, the max increased time are 30 seconds. Push”
▼
” can
reduce the time of Auto Scan, push it once can reduce 5 seconds, the max reduced time are 5
seconds. The above bottoms will work when you’re in Auto Scan only and other bottoms of
remote controller and bottoms of the front panel won’t work. Push “SCAN MODE” one more
time to exit Auto Scan.
Push “0” bottom, if the upper 4 LEDs which on the front panel flash three times at one
time, it means you can choose the output of OUTPUT 1 from 4 ports input by forward direction
or backing direction. Push”
▲
” bottom for backing direction. Push ”
▼
” bottom for forward
direction.
Push “0” bottom, if the lower 4 LEDs which on the front panel flash three times at one
time, it means you can choose the output of OUTPUT 2 from 4 ports input by forward direction
or backing direction. Push”
▲
” bottom for backing direction. Push ”
▼
” bottom for forward
direction.
Push “OSD” bottom to turn on or turn off the VIDEO. (ON: To turn on the video, OFF: To
turn off the video).
Push “AUDIO” bottom to turn on or turn off the AUDIO. (ON: To turn on the audio, OFF:
To turn off the audio).
Push “POWER” bottom to turn on or turn off the VIDEO, AUDIO and LED, except the
LED of Power.
