Power Connector:
OUTPUT LED:
FW:
When blinking, this LED indicates that the unit’s
firmware has been loaded, and that the system is
operating normally.
LINK:
When lit, this LED indicates that an HDBaseT
connection has been established between the TX and the
RX boards over the CATx cable.
Note
However sometimes, especially in demonstrations or in a
lab environment, the cable is rolled randomly in small turns
for convenience. The randomly rolled UTP cable suffers
additional signal impairments (compared to a straight cable)
and therefore the maximal operating reach might be
reduced.
Rolling a CAT5E cable around a 70cm fixed diameter
plastic drum has just a minor effect on the FEXT (Far End
Cross Talk) when compared to a fully stretched cable.
-6-
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-7-