Pairing with your device on first use
Press and hold the control buttons on both earbuds for around 5 seconds until the LED indicators illuminate and flash blue and red.
The earbuds will
‘
pair
’
with one another and the LED indicator on the right earbud will go out, accompanied by a voice message saying
“connected”. The left earb
ud will remain in pairing mode. Ensure your device has Bluetooth
activated and is set as ‘discoverable’.
Refresh your device’s pairing list and select AV:LINK
-TWE1. When the earbuds have paired with your device, there will be a voice
message saying
“pairing successful”
, and the LED indicators on both earbuds will intermittently flash blue.
Disconnecting and reconnecting to your device
To disconnect and switch off the earphones, press and hold the control button on either earbud until the LED indicator turns red. Both
earphones will switch off at the same time. To reconnect to the same device, press and hold the control buttons on both earbuds for
2-3 seconds, until the LED indicators turn blue. The earphones will pair to your device automatically and a voice message saying
“connected”
will
be heard, followed by “left channel” and “right channel”
in each corresponding earbud.
Play/pause
To play or pause the current track, short-press the control button on either earbud.
Hands-free operation
When you receive a phone call during audio playback, a voice message saying
“incoming call” will be heard
, alo
ng with the caller’s
telephone number. To accept the call, press the control button on the left earbud once. To reject the call, press the control button on
the left earbud twice. When you have completed the call, hang up by pressing the control button on the left earbud once.
Charging the earbuds
To charge the earbuds, carefully place them
–
button-side up
–
in the magnetic ports of the power dock. The LED indicators will glow
red, indicating that charging is taking place. When charging is complete, the LED indicators will intermittently glow blue. To fully
charge the earbuds from ‘flat’ take
s around 90 mins. On removing the earbuds from the dock after charging, they will automatically
switch on and pair with your device. Please ensure you switch them off if you
aren’t
intending to use them!
The Power Dock
The power dock is a compact, magnetic carry case and power bank, with capacity to fully recharge the earphones up to 7 times. To
charge the power dock, connect it to a compatible USB power socket using the USB cable provided. Blue LED power indicators on the
side of the dock will flash to indicate how much power is available: from 1 x LED for low power to 3 x LEDs for full power. When
charging the earbuds, the blue LED power indicators on the side of the dock will glow to indicate how much charge is available. When
the earbuds are fully charged, the lights will go out.
FAQ
Q)
The Bluetooth earphones will not pair with your device.
A)
Check that the earphones are in pairing mode; Bluetooth is enabled on
your device
; and the device is set as ‘discoverable’.
Q)
The Bluetooth earphones disconnect with my device within the stated 10m transmission distance.
A)
The maximum transmission
distance stated is dependent on a clear line of sight between the earphones and your device. If there are large metallic objects or
other devices transmitting radio or wireless signals in the vicinity, they may impact on the reception of the earphones.
Q)
The Bluetooth earphones won
’
t reconnect with my device.
A)
On occasion, your Bluetooth device or the earphones may enter a
lo
cked state and need resetting. To do this, find the earphones in your device list and select “forget this device”.
Then, refollow the
instructions for
“Pairing with your device on first use”
,
above.
Safety Disclaimer
Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock or equipment damage
and will also invalidate the warranty. This product is only designed for indoor use and must be kept away from water and high humidity
along with high temperatures and direct sunlight.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its
useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2018. AVSL Group Ltd.
