background image

BX Matrix Switching Systems

User Manual 

 

 

19

Key LCD 

Display Operation 

 

 

1. Press the NO.1 key of the 

output channel for 2 seconds and 

then enter the input channel when 

the red 0 on LCD begins to 

flicker. 

 

 

 

2. Press the NO.4 key of the input 

channel for 2 seconds for 

selection of NO.4 channel for 

input and NO.1 channel for 

output. Enter the output channel 

when LCD shows input channel 

“4” at NO.1 channel on IN row. 

 

 

3. Press the NO.3 key of the 

output channel for 2 seconds and 

then enter the input channel when 

the red 0 on LCD begins to 

flicker. 

 

 

 

 

 

4. Press the NO.4 key of the input 

channel for 2 seconds for 

selection of NO.4 channel for 

input and NO.1 and 3 channels 

for output. Enter the output 

channel when LCD shows “4” at 

NO.1 and NO.3 channels on IN 

row. 

 

 

5. Press the NO.5 key of the 

output channel for 2 seconds and 

then enter the input channel when 

the red 0 on LCD begins to 

flicker. 

 

 

 

 

6. Press the NO.4 key of the 

output channel for 2 seconds for 

selection of the NO.4 channel for 

input and the NO. 1, 3 and 5 

channels for output. Enter the 

output channel when NO.1, 3 and 

5 channels on LCD show 4 on IN 

row. 

Содержание BX-3044






























Отзывы: