AVL AVL05, Руководство пользователя

Страница: 16 / 41

AVL05 User Guide
V3.32
Page 16 of 41
Further, the product can provide accurate position information under
dynamic condition, the precision will be kept within 10 to 15 meters.
♣
Step 3: Fix the AVL in your car and connect the AVL to the power of
your car.
(1) Connect the wires to the I/O socket, please make sure the wires has
inserted to the I/O socket firmly. As below:
(2) look at the above pictures shows, Connect Pin20 to the anode of
the Car Battery, and Pin18 to the GND of Car battery GND, please note
that the exterior voltage must be between 12 V and 24V, please make sure
to comply with it.
【
more information
】
: AVL unit have lithium battery in it, and if AVL is cut
off from the power of the car, lithium battery will supply power to the AVL.
Once AVL is connected to the car power, lithium battery will be charged
until it reaches full.
【
caution
】
:After you have completed all the process, we must check that
the wiring connections are firm and reliable, and the joints are wrapped
with insulating tape tightly.
♣
Step 4: Turn on the AVL, observe the three LEDs in the AVL.
(1) Turn on the AVL, you will see the three LEDs flash at the same time.
It entered into initial mode.
(2) After about 25 S, the AVL will enter into work mode, Look at the
picture, with various statuses as below.