ComTech Modem
AvL Technologies
ǀ
Proprietary – Content is Subject to Change without Notice
4
2.3.
Hardware Connection
2.3.1.
Serial Communication Connection
Connect the AAQ antenna controller and PC or other device running the AAQ Remote GUI Modem to
a Network Switch or AvL CIP Rack Mount Interface.
The serial communication cable from the AAQ antenna modem should be plugged into the
Control
port on back of the ComTech modem.
Figure 2 - Serial Connection
2.3.2.
Ethernet Communication Connection
An Ethernet connection is not an option for the hardware associated with this module.
