3.3 BASE CONNECTION MENU
Enter the menu to connect to the BASE and operate on it.
Note:
Start the BASE before operating on it, see chapter “BASE turning on/off”.
Press the
OK button
to start the radio-scan to detect the BASE.
The following message appears when no BASE is detected:
If the radio scan detects more than one BASE, use the
arrow button
to choose.
Press the
OK button
to connect.
When the KEY detects only one BASE, it connects to the BASE directly. No confirmation needed. The
following messages confirm if the connection is successful. The messages display the ID number of the
BASE connected to the KEY.
Once connected, it is possible to enter the first BASE menus.
Menu
CONNECTION
OK=ENTER
RADIO
SCAN
DEVICES
OUT OF RANGE
Choose one of
03 devices
OK=ENTER ESC=EXIT
Selected
01 BAS id:00051
>01 BAS id:00051
02 BAS id:00012
03 BAS id:00549
OK=EXEC ESC=EXIT
Base
Code: 00051
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
Unauthorized use is forbidden.
ACMO-AVK | IOM Manuals
10
ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879
M117 VALVE TIMER HKEY - ver. 1.6
ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309
