+
-
PRESSURE REDUCING
Mod. ACV100A
Range
1.0 - 2.0 bar
Calibration
8.5 bar
Year:
rr
2020
www.acmosrl.com
R
R
EN1074-5 / EN558 SERIES 1
GJS/AISI304/EPDM
WATER 70C
s/n
00/000/000
MADE IN ITA
TT LY
LL
YEAR:
2020
DN
50
PN
10/16
879/BB0X99
www.acmosrl.com
R
DN50....100
DN125....150
DN200....600
3. Receiving and storage
3.1 Product identification
•
The valve is labeled on the body with ACMO/AVK
logo and model identification number of the valve.
•
The pilot is labeled with ACMO/AVK logo, the model
identification number and the setting parameters.
3.2 Packing
The valves are generally delivered in europallets, alternatively, in dedicated high thickness paper
boxes. In both cases, they are fastened to the pallet using bolts and covered with a polyethylene
heat-shrinking film. The package depends on the valve dimensions and on the actuator and/or
hydraulic circuit that may be installed on the valve. The package depends on the valve dimensions
and on the hydraulic circuit dimensions.
Packing examples:
3.3 Transport and storing
WARNING: Please carefully inspect the unit for damages or discrepancies with the order upon
arrival and report a claim immediately before unloading the goods.
Lifting the valve improperly may damage it. Lift the valves using slings (ISO 4878), otherwise, if
present on one valve, using the specific eyebolts.
Make sure the slings do not interfere with circuit components. Don’t lift up the valves using the
position indicator or the accessories and pipes installed on the valve.
Please make sure the lifting tools (lift truck, slings, cranes, hooks, etc.) are adequate for the weight.
Before you move the valve it is necessary to consult the weight table at page 7. Make sure their
coefficient of safety is equal or higher than the coefficient allowed by law.
If the valve is stored for a middle or long term, it is necessary to:
•
Lay the valve in a horizontal and firm position, in order to avoid capsizings which could
damage things or people.
•
Store the valves in an area protected from weather conditions especially from sunlight, which
could damage the coats and the gaskets.
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
Unauthorized use is forbidden.
ACMO-AVK | IOM Manuals
ACMO-AVK_IOM_879-M100_00-20200520
4
ACMO-AVK CONTROL VALVE SERIES 879
879/BB0X99 - M100 PRESSURE REDUCING VALVE
