AVK SEriES 29 HydrAnt
inStAllAtion, opErAtion & mAintEnAncE mAnuAl
1. introduction
AVK series 29 hydrants are designed to meet local specifications and include:
SA Hydrant - Series 29/010
WA Hydrant - Series 29/088
NT Hydrant - Series 29/288
NZ Squat with 2" round thread outlet - Series 29/588
NZ Tall with 2" round thread outlet - Series 29/589
Hydrant Isolation Valve - Series 29/00
AVK series 29 hydrant valves have DN80 bore.
The valves are 100% factory tested hydrostatically.
it iS importAnt to StAtE opErAtinG tEmpErAturE, prESSurE, mEdium And opErAtinG conditionS WitH
EnQuiriES/ordErS, So tHE moSt SuitABlE VAlVE Will BE SuppliEd For your SpEciFic purpoSE.
AVK Valves Pty Ltd, 559A Grand Junction Road, Wingfield, SA 5013, Australia - T: +61 8 8368 0900 - E: [email protected] - W: www.avkcivil.com.au
Version number 3
COPYRIGHT©AVK GROUP A/S 2017
pp. 1 of 6
AVK Valves Pty Ltd, 559A Grand Junction Road, Wingfield, SA 5013, Australia - T: +61 8 8368 0900 - E: [email protected] - W: www.avkcivil.com.au Version number 3
COPYRIGHT©AVK GROUP A/S 2017
pp. 2 of 6
materials:
castings (body, bonnet, stem cap, stopper & gland
flange)
Ductile Iron to AS 1831 Grade 500-7
coating
Fusion bonded epoxy (FBE)
Stem, isolation valve studs, nuts & washers
Stainless Steel
o-rings
NBR rubber
Stopper rubber
EPDM rubber
Bolts
Grade 8.8 encapsulated with hot melt glue
thrust collar, stopper nut
Dezincification resistant brass CZ 132 to BS 2872
Screwed outlet
Stainless steel with 316 bolts
dust cap
PE for screwed outlet
Refer to individual datasheets for specific information
29/00
29/010
29/088
29/288
29/588
