8.
Slots and openings in the cabinet located at the back and
underneath are provided for ventilation. To ensure reliable operation of the
product and to protect it from overheating, these openings must not be
blocked or covered. The openings should never be blocked as when
placing the product on a bed, sofa, rug, or other similar surface. This
product should never be placed near or over a radiator or heat source. This
product should not be placed in an enclosed installation unless proper
ventilation is provided.
9.
This product should be operated from the type of power source
indicated on the marked label. If you are not sure of the type of power
available, consult your dealer or local power company.
10. Do not allow anything to rest on the power cord. Do not put this
product where people will walk on or may be tripped by the cord.
11. If an extension cord is used with this product, ensure that the total
ampere ratings of the products connected to the extension cord do not
exceed the extension cord ampere rating. Also ensure that the total
amperes of all products connected to the mains outlet, does not exceed 15
amperes.
12.
Never push objects of any kind into this product through cabinet
slots as they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock. Never spill any kind of liquid
on the product.
13.
Do not attempt to service this product yourself, as opening or
removing covers may expose you to dangerous voltage points or other
risks. Refer all servicing to qualified service personnel.
14.
Disconnect this product from the main supply and refer servicing to
qualified service personnel under the following conditions:
A When the power cord or plug is damaged or frayed.
B If liquid has been spilled into the product.
C If the product has been exposed to rain or water.
D If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are covered by
the operating instructions since improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
