19
2.3.1 ScreenCrop Utility Control Panel
Figure 2-6
ScreenCrop Utility Control Panel
Status Information (1)
Devices on
Network
Displays all detected
Avitech’s Pacific converters in the same network
mask. The status button
becomes active (not grayed-out) when
Pacific C-A/C-AG/C-HSS/C-SHS is selected from the IP LIST window.
IP List Refresh
Button
Click the IP list refresh button
to update the connected Avitech
devices’ IP address in the same network mask.
Change IP
Changes the IP address of selected Pacific C-A/C-AG/C-HSS/C-SHS.
C-A
/
C-AG
/
C-HSS
/
C-SHS
Displays what type of Pacific converter is currently connected.
Input Port
Specify the source port of the input signal or select
“Autoscan.”
Output Resolution
Configures the specific output resolution and related frame rate.
Status Button
Shows the operational status of the selected Pacific C-A/C-AG/
C-HSS/C-SHS. This button is only available (not grayed-out) when the
Pacific C-A/C-AG/C-HSS/C-SHS is selected in
the “IP LIST” window
(refer to section 2.3.3 for details).
Cropping Feature (2)
Left
/
Top
/
Width
/
Height
Displays and adjusts
the cropped instance’s size and related location.
Set
After entering/adjusting the
Left
/
Top
/
Width
/
Height
parameters, click this
button to change the location of the four green cropping corners.
Instance
Chooses between 2 different area of interest instances (
Instance One
or
Two
) and then set the cropping parameters.