Point
3
Immobilizer Installation Manual
Control Unit
1. Select a location under the dash that will allow you to use the tie wraps to
securely fasten the control unit.
2. Mount the control unit as high as possible to ensure maximum security.
3. Do not mount the control unit near moving parts.
4. Avoid areas that are in the direct path of air blowing from the vents.
5. Route wires from this point, leaving slack for ease of service.
NOTE: All wires are BLACK. Each wire has a WHITE label to identify
their purpose (see Wiring Diagram). Remove the white label after you
make your wire connections.
Wiring Diagram
1
