®2002 Directed Electronics, Inc.
17
2.
Look at the programming table on page 26. To change the
first two digits of your code, refer to programming branch
number 17 and to change the last two digits, refer to pro-
gramming branch number 18.
3.
To enter programming mode:
■
Enter your existing PIN code number by following steps
1-12 in the
Protected Valet Mode s
ection of this guide.
■
Turn the ignition key to the ON position, then press and
release your Valet switch 17 times. You will hear a chirp
each time you press the switch to help you count.
■
When you reach branch number 17, stop and follow the
instructions in the “Secondary Action” column in the
programming table.
Example: If you would like the first two digits of your new code
to be one and one you would press button
once and
button once. To enter the digits zero and zero you would press
the
and
buttons together and go to the next step.
How to Change Your
PIN Code
Your system PIN Code is located on the back of this guide. Should
you wish to change this code to a number that is easier to remem-
ber, use the following procedure.
1.
Write down the new four-digit PIN number you wish to use.
