background image

Engine Shut Down Mode:
After the parking lights have flashed for 10 seconds, the siren will sound and
the parking lights will continue to flash. The system will monitor the engine
RPM's. When the carjacker stops or slows for a turn, the engine will
automatically shut off and not allow the vehicle to be restarted. This process
will allow the carjacker to drive a safe distance from you before shutting down 
the engine, but typically close enough to make recovery easier.
When the system enters the Engine Shut Down Mode, the remote control
WILL NOT deactivate the Anti-Carjacking feature. The valet switch must be
used 
to deactivate the feature and start the engine. 

To Activate the Anti-Carjacking Feature
The Anti-Carjacking feature can be programmed active or passive. Active
means the Anti-Carjacking feature can only be activated with the remote
control. Passive means the Anti-Carjacking feature will automatically activate
itself. (See the "Programming Table for System Features" on page 10.)

Active:
In a carjacking situation, while the engine is running, press the remote control
buttons #2 and #3 for 1-2 seconds.  The system will automatically begin the
Alert and Engine Shut Down modes. The system does not provide any audible
or visual arming confirmation that would alert the carjacker.

Passive:
Every time the doors are opened and the engine is started or already running,
the Anti-Carjacking feature will automatically activate.

To Deactivate the Anti-Carjacking Feature
1. Start the engine.
2. Within 10 seconds, press the remote buttons #2 and #3 simultaneously for 

1-2 seconds.

3. The parking lights will flash two times.
4. The LED will flash 4 times to confirm disarm.
5. While the engine is running, if a door is opened or the interior lights are

turned "ON," you must press the remote buttons #2 and #3 simultaneously 
for 1-2 seconds to deactivate the Anti-Carjacking feature.

4

Bandido

Owner's Manual

Содержание Bandido 2













Отзывы: