To Activate Remote-Controlled Valet
1. Press the remote control ARM/DISARM and START buttons at the same
time for 1-2 seconds.
2. The parking lights will flash 4 times, and the LED will turn on solid red.
To Deactivate Remote-Controlled Valet
1. Press the remote control ARM/DISARM and START buttons at the same
time for 1-2 seconds.
2. The parking lights will flash 3 times and the LED will turn off.
LED System Status Indicator
The LED on your vehicle dashboard or center console will inform you of the
system status.
LED
Status
Off
System is disarmed
On solid
In Protected Valet Mode
Slow flash
System is armed
Flashing in cycles
See "Specific Zone Intrusion Identification" on page 8
Rapid flash
Passive arming
Remote-Controlled Trunk Release Capability
If you had the optional Trunk Release feature installed, simply press the
remote control TRUNK button for 1-2 seconds to activate your vehicle
electronic trunk release. The trunk will "pop" open. This feature will only work
if your system is disarmed (may require an optional relay).
Remote-Controlled Accessory Outputs
These outputs allow you to add optional remote-controlled accessories to your
system such as a window roll-up, garage door opener or fuel door release. To
activate your optional accessories, see the "Programming Table for Remote
Controls" on page 16.
7
AviStart 6500 Owner's Manual - 110698 Rev. B
Содержание AviStart 6500
Страница 1: ...AviStart 6500 Owner s Manual 110698 Rev B ...
Страница 19: ...AviStart 6500 Owner s Manual 110698 Rev B ...
Страница 20: ...AviStart 6500 Owner s Manual 110698 Rev B ...