Avital AVISTART 3001, Руководство по установке

Страница: 14 / 20

Glow Plug Light Monitoring
The glow plug light (+) input wire will monitor the glow plug light in the
dashboard. When a remote start is attempted, the ignition will turn on and
when the glow plug light turns "OFF" the engine will start
1 . Locate the glow plug light wire that will show (+) 12 volts while the
ignition key is on and the glow plug light wire is illuminated.
2 . Connect the AviStart ORANGE/BLACK wire to the vehicle glow plug
might wire.
NOTE: Do not use both "pre-ignition" and "glow plug light monitoring" at
the same time (use one or the other).
Door Lock/Unlock
I
CAU TION : Be sure to ver ify the type of door lock sys tem you are
work ing with. Some types of door lock sys tems re quire op tional
re lays, for ex am ple, re verse po lar ity type door locks. Refer to the
diagrams on pages 12 - 14.
12
AviStart 3001 Installation Manual, Revision B 100199
Posi tive Trig ger Door Locks