Avital 2300, Руководство по установке

Страница: 30 / 33

30
© 2003 Directed Electronics, Inc. Vista, CA
table of zones
When using the Diagnostic functions, use the Table of Zones to see which input has triggered the system. It is
also helpful in deciding which input to use when connecting optional sensors and switches.
troubleshooting
■
Door input does not immediately trigger full alarm. Instead, first I hear chirps for 3 seconds:
That's how the progressive two-stage door input works! This is a feature of this system. This is an instant trigger,
remember, since even if the door is instantly re-closed, the progression from chirps to constant siren will con-
tinue.
■
Closing the door triggers the system, but opening the door does not:
Have you correctly identified the type of door switch system? This often happens when the wrong door input has
been used. (See H1/5 GREEN Door Trigger Input, Primary Harness Wire Connection Guide section of this guide.)
■
System will not passively arm until it is remotely armed and then disarmed:
Are the door inputs connected? Is the H1/6 blue wire connected to the door trigger wire in the vehicle? Either
the H1/5 green or the H1/7 violet should be used instead. (See Primary Harness Wire Connection Guide section
of this guide.)
ZONE NO. TRIGGER TYPE INPUT DESCRIPTION
1 Multiplex H1/6 BLUE wire. Connects to optional hood/trunk pins or
an optional sensor. Inputs longer than 0.8 seconds will
instantly trigger the full alarm sequence and report Zone 1.
2 On-board impact sensor Second-stage of on-board impact sensor (heavy impacts
from impact sensor).
3 Two-stage, progresses from Door switch circuit. H1/5 GREEN or H1/7 VIOLET.
warning to full alarm
5 Two-stage, progresses from Ignition. H1/9 YELLOW.
warning to full alarm
NOTE : The Warn-away response does not report on the LED.