1
18
8
©
2004 Directed Electronics, Inc.
LLEED
D:: A red light mounted inside the vehicle, at a location deter-
mined by the installer. The LED indicates the status of your system
and also reports triggers and faults in the system or sensors.
SSh
ho
occkk SSeen
nsso
orr:: A dual-stage shock sensor, located on-board the
control module, that detects impacts to the vehicle.
SSiirreen
n:: A noise generating device, usually installed in the engine
compartment of the vehicle. The siren generates the chirps and
tones heard when the system is triggered.
R
Reem
mo
ottee:: A hand-held, transmitter control that operates the various
functions of the security system.
TTrriig
gg
geerr o
orr TTrriig
gg
geerreed
d SSeeq
qu
ueen
nccee:: The "setting off" or "tripping" of
the alarm. A triggered sequence consists of the siren sounding and
the parking lights flashing for 30 seconds.
V
Vaalleett SSw
wiittcch
h:: A small, push-button switch mounted inside the
vehicle, at a location determined by the installer. This switch is
used to override the alarm when a remote is lost or damaged, or
can be used to put the system into Valet Mode.
W
Waarrn
n--A
Aw
waayy R
Reessp
po
on
nssee:: Light impacts generate this response, which con-
sists of several seconds of siren chirps and flashing parking lights.
ZZo
on
nee:: A zone is a separate input that the alarm recognizes as
unique. Each input to the system is connected to a particular zone.
Two or more inputs may share the same zone.