Product Operation
COOL mode
•
After powering on the air conditioner, the default mode should be in
COOL
mode. You can press the mode button
on the machine or the
remote control
to cycle through the different modes until you are in the
COOL
mode, and the indicator light will be on.
•
Pressing the UP/DOWN button
will adjust the setting temperature
(6
4
℉
~86
℉
)
•
Pressing the fan button will cycle fan speed setting between
high
and
low.
FAN mode
•
Pressing the
fan button will cycle fan speed setting between
high
and
low.
• Temperature
cannot be set in this mode.
DRY mode
•You
can press the mode button on
the machine or the remote control
to cycle through the different modes until you are in the
DRY
mode, and the
indicator light will be on.
•In
DRY mode,
The
compressor motor will
and
automatically turn on
shut off to keep the room temperature between 59
℉
(or 15°C),
and 55
℉
(or 13°C ).
(There
is a 3 minute time-delay protective
function for the compressor).
•In
DRY mode, the fan will not be adjustable and will only run on
low setting.
•
Temperature
cannot be set in this mode
(Usage tip: When using the DRY
function, the exhaust
hose
assembly
should be removed and the windows should be closed.
Otherwise,
the unit will run a lot less efficiently, and you may often get
the alarm
for the water bucket being full with display screen flashing
“FL”, as
well as an audible alarm, and the compressor will shut off
automatically.)
13
